Niagara Cutter N61477 Carbide Square Nose End Mill, inch, TiCN Finish, Finishing Cut, 45 Degree Helix, 2 Flutes, 6x22 Overall Le

Description

If heat is not reduced effectively, the tools cutting edges will dull and additional material buildup can occur. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The round shank accommodates a variety of holders. The Niagara Cutter A245 TiCN-coated carbide square nose end mill has two flutes, a wiper flat, and a 45-degree helix, making it suitable for high-performance, fine-finish cuts on aluminum and other nonferrous materials. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The TiCN coating offers the increased hardness and abrasion resistance required to machine aluminum and other nonferrous materials compared to uncoated end mills. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. End mills are designed to remove material and create three-dimensional shapes or profiles. The center-cutting design has cutting teeth at the end of the tool, so it can be fed straight into the workpiece like a drill bit. The shank is the end of the tool held in place by a tool holder or machine. Cutting diameter tolerance is +0.000 to -0.002.

Key Features

• End mills are designed to remove material and create three-dimensional shapes or profiles.
• The TiCN coating offers the increased hardness and abrasion resistance required to machine aluminum and other nonferrous materials compared to uncoated end mills.
• The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut.
• A wiper flat on the cutting edges provides a smoother finish to the workpiece than conventional end mills.
• The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life.
• The Niagara Cutter A245 TiCN-coated carbide square nose end mill has two flutes, a wiper flat, and a 45-degree helix, making it suitable for high-performance, fine-finish cuts on aluminum and other nonferrous materials.