Awlgrip Polyester Urethane Topcoat Base - Snow White High Gloss - Quart G8044

Description

Sanding between coats with 280 to 400 grit paper will provide a smoother finish. Application Instructions General: Sanded surface must be dry and clean. Brush/Roller Application: Apply Awlgrip Topcoat in two coats of 1.5 to 2.5 mils WFT each. Do not apply 3005 over white or pastel colors, or to bare wood. With its superior resistance to sun, saltwater, chemicals and abrasion, Awlgrip is ideal for coating everything from topsides, cabin tops, decks and masts to engines. Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun. Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***. Reduce 25-33% with T0031. In three coat applications, coats two and three not "full, wet" coats. Awl-grip high gloss G3005 can be applied over dark colors which have been sanded with 320-400 grit paper. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Overall mixture is 2:1:3/4-1 by volume. Mixing and Reduction Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. Allow tack coat to "flash off" 30 to 45 minutes. The second coat is a slightly heavy tack coat with the third coat just wet enough to obtain full hide or color coverage. 40% is maximum.

Key Features

• Do not apply 3005 over white or pastel colors, or to bare wood.
• Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat.
• Sanding between coats with 280 to 400 grit paper will provide a smoother finish.
• Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***.
• Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun.
• Allow tack coat to "flash off" 30 to 45 minutes.