3 Legged Thing Ellie PD Universal L-Bracket Compatible with Peak Design Capture - Copper (Orange)

Description

Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. Ellie PD is specifically designed to work with Peak Design's Capture Clip system (Peak Design Capture v3 only). This opening can be placed in one of four positions by inverting or reversing the vertical aspect. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. You may need to adjust Ellie to fit your camera and to access side ports, battery doors, and flip-out screens. Ellie PD is specifically designed to work with Peak Design's Capture Clip system (Peak Design Capture v3 only). The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. It features a standard Arca Swiss compatible footing that clips securely into the Capture.Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. The rear edge of the base is sloped to better enable screen access.Ellie's vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This allows users to position the L-Bracket in the optimal position for their camera.

Key Features

• This allows users to position the L-Bracket in the optimal position for their camera.
• You may need to adjust Ellie to fit your camera and to access side ports, battery doors, and flip-out screens.
• It features a standard Arca Swiss compatible footing that clips securely into the Capture.Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base.
• Ellie PD is specifically designed to work with Peak Design's Capture Clip system (Peak Design Capture v3 only).
• Ellie PD is compatible with a wide range of mirrorless and DSLR cameras, but is specifically designed to be used with Peak Design's Capture Clip system (v3 only).
• The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool.