21-3 Kukko Internal Extractor

Description

Make sure that the arms are parallel. The counter support's arms must not block the part due to be removed. Mechanical pressure screw. For extracting inner bearings, bearing outer rings and bushings. Spare parts are available for internal extractor sizes 21-89 and 21-90. Counter support: 2.  Product Data Sheet Description The 2-shell design with extra large grasp edges ensures safe extraction. Advantage KUKKO internal extractors can be combined with counter supports (22-1 or 22-2)) and slide hammer (22-0). Make sure that the jaws sit securely below the bearing's inner race. How it works Place the internal extractor into the bearing's hole. For removal, the spindle on the counter support series 22 or on the slide hammer series 22-0 is screwed onto the key spindle on the internal extractor. Using a ring spanner, tighten the nuts to open the jaws of the internal extractor. The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading. Advantage KUKKO internal extractors can be combined with counter supports (22-1 or 22-2)) and slide hammer (22-0). The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading. When combined with the internal extractors, extensions from series 21-V enable deeper bearings to be extracted.

Key Features

• The counter support's arms must not block the part due to be removed.
• For removal, the spindle on the counter support series 22 or on the slide hammer series 22-0 is screwed onto the key spindle on the internal extractor.
• Advantage KUKKO internal extractors can be combined with counter supports (22-1 or 22-2)) and slide hammer (22-0).
• For extracting inner bearings, bearing outer rings and bushings.
• The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading.
•  Product Data Sheet Description The 2-shell design with extra large grasp edges ensures safe extraction.